cillect this site|message |MAP |sitemaphello,Welcome to the production of cold and hot shock test box into the official website!

Inquiries

076985050140

Rigorous production technology innovation pursuit, meticulous service for customers to provide customers with the best quality products
HONGJIN
Position:Home > Product > Salt spray test >
Salt spraying tester
  • Salt spraying tester
  • Salt spraying tester
  • Salt spraying tester
  • Salt spraying tester

Salt spraying tester

The latest intelligent full-automatic salt spray test machine adopts the latest microcomputer temperature and time controller, which is different from the previous old type of temperature control meter relay circuit, which is prone to circuit failure, ...

Order hotline:076985050140
The latest intelligent full-automatic salt spray test machine adopts the latest microcomputer temperature and time controller, which is different from the previous old type of temperature control meter relay circuit, which is prone to circuit failure, and ensures no fault during the long working time of 300000H.
Temperature sensor adopts Japanese imported digital sensor, which can work for ten years without aging and temperature decay.
The control part adopts intelligent programmable operation (divided into manual and automatic operation), which can spray continuously and at intervals, and can reduce the operation steps to the greatest extent.
Spray mode:
A programmable salt spray tester
The whole PVC board is made by using advanced ring belt technology, strong structure, never deformation, and resistant to acid and alkali, high temperature and never aging. It is applicable to various test specifications such as salt fog and copper acetate.L controller is easy to operate on the same panel, and it is clear at a glance.
B adopts automatic/manual water feeding system, which can automatically replenish water level when the water level is insufficient. The test will not be interrupted.Warning of insufficient water level to ensure safety.
C precision glass nozzle (PYREX) is made of special glass. The mist diffuses evenly and falls naturally on the test piece. It can be used continuously for 4000 hours and no crystallization salt is blocked.
D is equipped with dual overtemperature protection function, warning display when overtemperature occurs, and the heater is cut off to ensure safety.
E inlet temperature digital temperature sensor with digital display, PID control, the error of plus or minus 0.1 ℃.Imported timer adopts digital display, timing is accurate and can be set in sections when H.
F test room adopts direct steam heating method, the heating speed is fast and uniform, and the standby time is reduced. The heating tube is made of highly corrosion-resistant titanium control.
G spray tower with a cone disperser, with guided fog, fog control and uniform fog.
H has automatic mist removal device, which can clear the test products in the observation test room.Seal the tank with fog. Use water seal to prevent fog leakage.
The sealing cover of laboratory I is made of European grade a-class acrylic impact plates.
J refill bottle with hidden water level perspective window, easy to clean, not rupture.
The basket frame of the laboratory adopts a plane dividing frame, which can be adjusted at any Angle. The directions of fog falling on all sides and being exposed to fog are completely consistent.
Additional test rooms can be made to meet customer requirements.
GB/T 2423.17-1993 salt spray test
GB/T 2423.18-2000 salt spray test
GB/T 10125-1997 salt spray test
ASTM.B117-97 salt spray test
JIS H8502 salt spray test
Iec68-2-11 salt spray test
1996 salt spray test
GB.10587-89 salt spray test
Salt spray test
CNS 4159 CASS accelerates copper acetate mist test
GB/T 12967.3-91 CASS accelerated copper acetate mist test
specifications
Model hy-60 hy-90 hy-120 hy-160 hy-200
Test chamber box size (cm) 60x45x40 90x60x50 120x80x50 160x100x50 200x120x60
The test outdoor box size (cm) is 107x60x118 141x88x128 190x110x140 230x130x140 270x150x150
Laboratory test temperature brine method (NSS ACSS) 35 ℃ + / - 1 ℃ / corrosion test (CASS) ℃ to 50 ℃ + 1
Pressure test (NSS ACSS) barrel temperature brine 47 ℃ + / - 1 ℃ / corrosion test (CASS) 63 ℃ + / - 1 ℃
Brine temperature 35 ℃ to + / - 1 ℃ to 50 ℃ + 1 ℃
The laboratory capacity is 108L 270L 480L 800L 1440L
The salt water tank capacity is 15L 25L 40L 40L 40L
Add 0.26 grams of copper chloride (CuCl2 2H2O) per liter to 5% sodium chloride solution concentration or 5% sodium chloride solution concentration
Compressed air pressure 1.00 + 0.01 KGF /cm2
Spray volume 1.0~2.0ml/80cm2/h (at least 16 hours should be collected, and the average value should be obtained)
Laboratory relative humidity over 85%
* NOT NULLProcurement:Salt spraying tester
* Contact: Please enter your name
* phone: Please input the telephone
E-Mail:
* Blanket PO:
For Senior Visiting StudentprocurementThe quantity and description of the products make it convenient for us to prepare uniformly。
* CAPTCHA: Can't see? Click on the change

Contact Us


Dongguan Hongjin test instrument co,.ltd
HOTLINE:076985050140

consultation:0769-85050140

Fax:0769-85050141

E-mail:[email protected]

WEB:www.hongyu17-group.com

ADD:Building D, No. 68, Xixing 3rd Street, Changping Town, Dongguan, Guangdong, China (Mainland)



  • 官方微信